Invited speakers in Quchent,
Quenching and Distortion Control symposium:
Prof.Dr. Joseph
Agboola [Nigeria]
Federal
University of Technology
Presentation
title: Evaluation of Distortion in Vegetable Oil Quenched Medium Carbon
Steel
Dr. NaiLu
Chen [China]
Shanghai Jiao
Tong University
Presentation
title: New Development of Theory and Applications for Alternately Timed
Quenching technology
Prof.Dr. Mengnie
Victor Li [China]
Kunming
University of Science and Technology
Presentation
titelApplication of Integrated Computational Materials Engineering in
Heat Treatment of Steel
Prof. Xinmin
Luo [China]
Jiangsu
University
Presentation
title: "Cooling Engineering" for Steel’s Quench-hardening Derived from
“Cooling Modeling”: A Technology Overview
13 September 2018 淬火
Quenchant, Quenching and Distortion Control
淬火介质、冷却与畸变控制
Room: 207
Chair：Dr George Totten，Prof Nailu Chen
Session Chair: George Totten，Yonghua Rong，Joesph Agboola，Xinmin Luo Time
Title
08:00-08:25
☆
Evaluation of Distortion in Vegetable Oil Quenched Medium Carbon Steel
Joseph Agboola
Department of Mechanical Engineering, Federal University of Technology
08:25-08:50
☆ New Development of Theory and Applications for Alternately Timed Quenching technology
NaiLu Chen
Shanghai Jiao Tong University 08:50-09:20
☆ Application of Integrated Computational Materials Engineering in Heat Treatment of Steel
Victor li
Kunming University of Science and Technology 09:20-09:45
☆ “Cooling Engineering” for Steel’s Quench-hardening Derived from “Cooling Modeling”: A Technology Overview
Xinmin Luo
Jiangsu Universiy 09:45-10:00
New Era in Designing and Governing Cooling Intensity of Liquid Quenchants to Decrease Distortion
N. I. Kobasko
O. IQ Technologies, Inc. 10:00-10:15
Parallelized Particle Swarm Optimization to Estimate the Heat Transfer Coefficients of Several Vegetable Oils and Compared to Conventional and Accelerated Petroleum Oil Quenchants
Zoltán Fried
Obuda University 10:15-10:30
Investigation of Longitudinal Quenching Crack by Finite Element Simulation
Yu Liu
Shanghai Jiao Tong University 10:30-10:45
“Uphill” Quenching of Aeronautical Aluminum Alloys: Comparative of Influence fromMechanical Properties for AA7075-T6
Wellington Mattos
Engenharia de Producão Mecanica, Escola de Engenharia de São Carlos, Universidade de São Paulo 10:45-11:00
Cooling Curves Characterization of Less Commonly Encountered Vegetable Oils for Quenchant Applications
Rosa Simencio Otero
Engenharia de Producão Mecanica, Escola de Engenharia de São Carlos, Universidade de São Paulo 11:00-11:15
Vegetable Oil and Petroleum Oil Cooling Curve Characterization Using MATLAB
Lemmy Meekisho
Portland State University, Department of Mechanical and Materials Engineering 11:15-11:30
Prediction of thermal boundary conditions by using FWA
Zoltan Fried
Obuda University 11:30-11:45
Online Database for Liquid Quenchants
Imre Felde
Obuda University 11:45-12:00
Maintenance of Oil Quenchants
Donald MacKenzie
Houghton International Inc. 12:00-12:45
Lunch
12:45-13:00
Distortion in hollow cylinder with thin wall during high pressure gas quenching
Ning YU
Shanghai Jiao Tong University 13:00-13:15
Polymer quenchants for induction hardening – alternatives without boron and formaldehyde releasing biocides
Eva Troell
Swerea IVF AB 13:15-13:30
Experimental Method for emulating the cooling conditions of massive components
Diego Lozano
Universidad de Monterrey 13:30-13:45
Holistic Problem of Cooling Effect of Vertically Oil Quenched Shaft-type Work-piece
Kejian Zhang
Beijing Huali Fine Chemical Co., Ltd. 13:45-14:00
Application value and controllability analysis of supercritical CO2 as a new quenchant
Haibin Wang
Shanghai Yibai heat treatment equipment co.ltd 14:00-14:15
New Method for Controlled-Cooling of High-carbon chromium bearing Steels after Forging
Yongping Zuo
Nanjing KERUN Lubricants Co.,Ltd.,Nanjing Jiangsu 14:15-14:30
Tea Break
http://www.25ifhtse.org/dct/page/70040
一键同布到我集网·各家微博
